Removal

AIR CONDITIONING: COMPRESSOR: REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE

(a) Remove the bolt and disconnect the cooler refrigerant suction hose from the cooler compressor.





(b) Remove the O-ring from the cooler refrigerant suction hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

4. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler compressor.





(b) Remove the O-ring from the cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

5. REMOVE ENGINE UNDER COVER RH

6. REMOVE FAN & GENERATOR V BELT Removal

7. REMOVE COOLER COMPRESSOR ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 bolts and cooler compressor.