Disassembly

AIR CONDITIONING: COMPRESSOR: DISASSEMBLY

1. REMOVE MAGNET CLUTCH ASSEMBLY

(a) Using SST, hold the magnet clutch hub.

SST : 09985-00270





(b) Remove the bolt, magnet clutch hub and magnet clutch washer.

HINT

There is no set number of magnet clutch washers since they are used for adjusting.

(c) Using a snap ring expander, remove the snap ring and magnet clutch rotor.





NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.

(d) Disconnect the connector.

(e) Using a snap ring expander, remove the snap ring and magnet clutch starter.