FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Road Test





CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST

HINT

SET and '-', RES and '+', and ON-OFF functions share the same switch. Operate the cruise control main switch according to the directions ([down arrow], [up arrow], [left arrow]) indicated on the switch.

1. PROBLEM SYMPTOM CONFIRMATION

(a) Inspect the SET function.

(1) Push the ON-OFF button to turn the cruise control system on.

(2) Drive at the required speed (40 km/h (25 mph) or higher).

(3) Push down the cruise control main switch to "SET / -".

(4) After releasing the switch, check that the vehicle cruises at the set speed.





(b) Inspect the '+' (ACCEL) function.

(1) Push the ON-OFF button to turn the cruise control system on.

(2) Drive at the required speed (40 km/h (25 mph) or higher).

(3) Push down the cruise control main switch to "SET / -".

(4) Check that vehicle speed increases while the cruise control main switch is pushed up to "RES / +" , and that the vehicle cruises at the newly set speed when the switch is released.

(5) Momentarily (approximately 0.6 seconds) push up the cruise control main switch to "RES / +" and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).





(c) Inspect the '-' (COAST) function.

(1) Push the ON-OFF button to turn the cruise control system on.

(2) Drive at the required speed (40 km/h (25 mph) or higher).

(3) Push down the cruise control main switch to "SET / -".

(4) Check that vehicle speed decreases while the cruise control main switch is pushed down to "SET / -", and the vehicle cruises at the newly set speed when the switch is released.

(5) Momentarily (approximately 0.6 seconds) push down the cruise control main switch to " SET / -", and then immediately release it. Check that the vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).





(d) Inspect the CANCEL function.

(1) Push the ON-OFF button to turn the cruise control system on.

(2) Drive at the required speed (40 km/h (25 mph) or higher).

(3) Push down the cruise control main switch to "SET / -".

(4) When doing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.

* Depressing the brake pedal

* Depressing the clutch pedal (for Manual Transaxle)

* Moving the shift lever from the D position to the N, 2 or L position (for Automatic Transaxle).

* Pushing the ON-OFF button (the cruise control system is turned off).

* Pulling the cruise control main switch to CANCEL





(e) Inspect the RES (RESUME) function.

(1) Push the ON-OFF button to turn the cruise control system on.

(2) Drive at the required speed (40 km/h (25 mph) or higher).

(3) Push down the cruise control main switch to "SET / -".

(4) When doing one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.

* Depressing the brake pedal

* Depressing the clutch pedal (for Manual Transaxle)

* Moving the shift lever from the D position to the N, 2 or L position (for Automatic Transaxle).

* Pulling the cruise control main switch to CANCEL

(5) After pushing the cruise control main switch to "RES / +" at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.