Installation

MIRROR: OUTER REAR VIEW MIRROR: INSTALLATION

HINT

* Use the same procedures for the RH side and LH side.

* The procedures listed below are for the LH side.

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH





(a) Install the mirror with the 3 nuts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.