Disassembly

EXTERIOR: FRONT BUMPER: DISASSEMBLY

1. REMOVE HOOD TO FRONT END PANEL SEAL

(a) Using a clip remover, detach the 8 clips and remove the panel seal.

2. REMOVE FRONT BUMPER REINFORCEMENT

(a) Using a clip remover, remover the 2 clips and reinforcement from the bumper cover.

3. REMOVE RADIATOR GRILLE LOWER

4. REMOVE FRONT BUMPER HOLE COVER

5. REMOVE FRONT BUMPER GUARD COVER LH

(a) Using a screwdriver, detach the 3 claws and remove the cover.





HINT

Tape the screwdriver tip before use.

6. REMOVE FRONT BUMPER GUARD COVER RH

HINT

Use the same procedures described for the LH side.