Front Door Speaker

AUDIO / VISUAL: FRONT DOOR SPEAKER: ON-VEHICLE INSPECTION

1. INSPECT FRONT NO. 1 SPEAKER

HINT

Remove interior parts so that the front No. 1 speaker can be seen.

(a) Check the speaker installation.

OK:

The speaker is securely installed.

(b) If the result is not as specified, reinstall the front No. 1 speaker.

(c) Visually check the speaker.

OK:

The cone paper of the speaker is not torn.

(d) If the result is not as specified, replace the front No. 1 speaker.

(e) Speaker resistance check

(1) Disconnect the front No. 1 speaker connector.

(2) Measure the resistance between the terminals of the speaker.

Standard resistance:

Approximately 4 Ohms

(3) If the result is not as specified, replace the front No. 1 speaker.

2. INSPECT FRONT NO. 2 SPEAKER

HINT

Remove interior parts so that the front No. 2 speaker can be seen.

(a) Check the speaker installation.

OK:

The speaker is securely installed.

(b) If the result is not as specified, reinstall the front No. 2 speaker.

(c) Visually check the speaker.

OK:

The cone paper of the speaker is not torn.

(d) If the result is not as specified, replace the front No. 2 speaker.