Removal

ENGINE IMMOBILISER: TRANSPONDER KEY ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

2. REMOVE METER HOOD SUB-ASSEMBLY Removal

3. REMOVE COMBINATION METER ASSEMBLY Removal

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal

5. REMOVE UPPER CONSOLE PANEL Removal

6. REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY

7. REMOVE NO. 1 RADIO BRACKET Removal

8. REMOVE NO. 2 RADIO BRACKET Removal

9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

10. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Removal

11. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Removal

12. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

HINT

Use the same procedure for the RH and LH side.

13. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

HINT

Use the same procedure for the RH and LH side.

14. DISCONNECT PASSENGER AIRBAG CONNECTOR

15. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal

16. REMOVE TRANSPONDER KEY ECU ASSEMBLY

(a) Disconnect the connector.





(b) Remove the screw and transponder key ECU assembly.