Pinout Values and Diagnostic Parameters

U341E AUTOMATIC TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: TERMINALS OF ECM

TERMINALS OF ECM

1. ECM




HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol) " for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.













(a) Waveform 1










(b) Waveform 2










(c) Waveform 3