Reassembly

U341E AUTOMATIC TRANSAXLE: SHIFT LEVER: REASSEMBLY

REASSEMBLY

1. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY





(a) Install the indicator light wire sub-assembly into the shift lock control unit assembly.
NOTICE: Fit the indicator light wire sub-assembly into the shift lock control unit, as shown in the illustration.

2. INSTALL SHIFT LOCK RELEASE BUTTON





(a) Install the shift lock release button and shift lock release spring into the shift lock control unit assembly.
3. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER





(a) Install the No. 2 position indicator slide cover onto the position indicator slide cover.
4. INSTALL POSITION INDICATOR SLIDE COVER





(a) Install the position indicator slide cover onto the shift lock control unit assembly.
NOTICE: Install the slide cover onto the shift lock control unit with the arrow mark directed forward.

5. INSTALL SHIFT LOCK RELEASE BUTTON COVER
(a) Install the shift lock release button cover onto the upper position indicator housing.
6. INSTALL NO. 2 CONTROL POSITION INDICATOR PLATE





(a) Engage the claw, and install the No. 2 control position indicator plate onto the upper position indicator housing.
7. INSTALL UPPER POSITION INDICATOR HOUSING





(a) Engage the 4 claws, and install the upper position indicator housing onto the shift lock control unit assembly.
NOTICE: Securely engage the 4 claws.