Installation

PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION

INSTALLATION

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY





(a) Install the parking brake switch with the screw.
Torque: 0.9 Nm (9 kgf-cm, 8 in-lbf)
(b) Connect the parking brake switch connector.
2. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY Installation
3. INSTALL CONSOLE BOX CARPET Installation
4. INSTALL REAR CONSOLE BOX COVER Installation
5. INSTALL UPPER CONSOLE PANEL Installation
6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation