Removal

2ZR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE NO. 1 SEAT LEG COVER Removal
2. REMOVE NO. 2 SEAT LEG COVER Removal
3. REMOVE REAR SEAT ASSEMBLY Removal
4. REMOVE REAR FLOOR SERVICE HOLE COVER Removal
5. DISCHARGE FUEL SYSTEM PRESSURE
Precaution
6. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY Removal
7. DISCONNECT FUEL TANK VENT HOSE Removal
8. REMOVE FUEL PUMP GAUGE RETAINER Removal
9. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Removal
10. REMOVE FUEL SENDER GAUGE ASSEMBLY




NOTICE: Do not separate the tube indicated in the illustration.





(a) Disconnect the fuel sender gauge connector.





(b) Release the lock by sliding the fuel sender gauge upward, as shown in the illustration.