Removal

AXLE: REAR AXLE HUB: REMOVAL

REMOVAL

1. REMOVE REAR WHEEL
2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY Removal





3. DISCONNECT SPEED SENSOR WIRE
(a) Using a screwdriver, remove the claw of the connector lock portion and disconnect the skid control sensor wire connector.
NOTICE: Do not remove the connector cover from the connector because the skid control sensor wire may be damaged.





4. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
(a) Remove the 4 bolts and remove the axle hub and bearing from the axle beam.
NOTICE: Suspend the backing plate with a piece of rope.