Installation

AXLE: REAR AXLE HUB: INSTALLATION

INSTALLATION

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY





(a) Install the axle hub and bearing onto the axle beam with the 4 bolts.
Torque: 90 Nm (918 kgf-cm, 67 ft-lbf)
2. INSPECT REAR AXLE HUB BEARING Rear Axle Hub





3. CONNECT SPEED SENSOR WIRE
(a) Connect the skid control sensor wire connector.
4. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
5. ADJUST REAR DRUM BRAKE SHOE CLEARANCE Installation
6. INSTALL REAR WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
7. CHECK ABS SENSOR SIGNAL
HINT:
Test Mode Procedure