Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

INSTALLATION
NOTICE: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.





1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Connect the pressure warning receiver connector.
(b) Install the tire pressure warning receiver with the nut.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
2. INSTALL ROOF HEADLINING ASSEMBLY
HINT: See the steps from "INSTALL ROOF HEADLINING ASSEMBLY" through to "INSPECT SRS WARNING LIGHT" Installation.

3. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: Test Mode Procedure