Camshaft Bearing

INSTALL CAMSHAFT





Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps onto the cylinder head.
No. 1 bearing cap - Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
No. 3 bearing cap - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)

INSTALL NO. 2 CAMSHAFT





No. 2 bearing cap - Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
No. 3 bearing cap - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)