Installation

LIGHTING: STOP LIGHT SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STOP LIGHT SWITCH

(a) Install the stop light switch into the adjuster until it slightly touches the brake pedal.
NOTICE: Do not depress the brake pedal.

(1) Make a quarter turn clockwise to install the stop light switch.
NOTICE: Do not depress the brake pedal.
HINT: The turning torque for installing the stop light switch is as below.

Torque: 1.5 Nm (15 kgf-cm, 13 in-lbf)or less
(b) Check the stop light switch clearance.
Stop light switch clearance:
1.5 to 2.5 mm (0.059 to 0.098 in.)