Installation

2AZ-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FUEL SENDER GAUGE ASSEMBLY





(a) Install the fuel sender gauge assembly by sliding it downward.





(b) Install the wire harness.
NOTICE: Do not damage the wire harness.

(c) Install the harness protector.
(d) Connect the fuel sender gauge connector.
2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Installation
3. INSTALL FUEL PUMP GAUGE RETAINER Installation
4. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY Installation
5. INSTALL REAR FLOOR SERVICE HOLE COVER Installation
6. INSPECT FOR FUEL LEAK
Fuel System
7. INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY Installation