Removal

BRAKE CONTROL: REAR SPEED SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR WHEEL
3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
4. LOOSEN WIRE ADJUSTING NUT Removal
5. REMOVE REAR FLOOR SIDE MEMBER COVER Removal
6. SEPARATE PARKING BRAKE CABLE ASSEMBLY Removal
7. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY Removal
8. REMOVE REAR DISC Removal





9. DISCONNECT SPEED SENSOR WIRE
(a) Using a screwdriver, disengage the claw and disconnect the speed sensor wire connector.
NOTICE: Do not remove the connector cover from the connector because the speed sensor wire may be damaged.

10. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY Removal