Removal

MIRROR: OUTER MIRROR SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: Wait at least 90 seconds after disconnecting the cable to prevent the airbag working.

2. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal
3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal
4. REMOVE FRONT PILLAR GARNISH RH Removal
5. REMOVE FRONT PILLAR GARNISH LH Removal
6. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY Removal
7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal
8. REMOVE COMBINATION METER ASSEMBLY Removal
9. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal
10. REMOVE NO. 1 SWITCH HOLE BASE Removal





11. REMOVE OUTER MIRROR SWITCH ASSEMBLY
(a) Disengage the 2 claws and remove the outer mirror switch assembly.