Installation

2AZ-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION

INSTALLATION

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY





(a) Apply gasoline to 2 new O-rings and then install them onto the fuel pressure regulator assembly.





(b) Install the fuel pressure regulator assembly.
2. INSTALL FUEL PUMP
Refer to the procedures under "INSTALL FUEL PUMP" Reassembly.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
4. INSPECT FOR FUEL LEAK
Fuel System