Installation

2AZ-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

INSTALLATION





1. INSTALL FAN & GENERATOR V BELT
(a) Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.
SST: 09216-42010
09216-04010

NOTICE:
- Be sure to connect SST and the tools so that they are in line during use.
- When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
- After the tensioner is fully retracted, do not apply any more force than is necessary.

2. INSTALL REAR ENGINE UNDER COVER RH