Camshaft Bearing: Specifications

INSTALL CAMSHAFT





Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps onto the cylinder head.
No. 1 bearing cap - Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
No. 3 bearing cap - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)

INSTALL NO. 2 CAMSHAFT





No. 2 bearing cap - Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
No. 3 bearing cap - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)