Removal

BRAKE CONTROL: FRONT SPEED SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT WHEEL
3. REMOVE FRONT SIDE MUDGUARD Removal
4. REMOVE FRONT FENDER LINER Removal
5. REMOVE FRONT SPEED SENSOR





(a) Disengage clamp A from the body.
(b) Disconnect the speed sensor connector.
(c) Disengage clamp B from the body.
(d) Remove the bolt and No. 2 sensor clamp from the body.
(e) Remove the bolt and No. 1 sensor clamp from the shock absorber.
(f) Disengage clamp C from the shock absorber.
(g) Remove the bolt and speed sensor from the steering knuckle.
NOTICE:
- Keep the speed sensor tip and installation portion free of foreign matter.
- Remove the speed sensor without turning it from its original installation angle.