C1555

POWER STEERING: POWER STEERING SYSTEM: C1522-C1555: Motor Circuit Malfunction

DTC C1522 - Motor Circuit Malfunction

DTC C1523 - Motor Circuit Malfunction

DTC C1524 - Motor Circuit Malfunction

DTC C1555 - Motor Relay Welding Failure

DESCRIPTION

The power steering ECU supplies the current to the power steering motor through the motor circuit.






WIRING DIAGRAM





INSPECTION PROCEDURE
NOTICE: If the steering column or power steering ECU has been replaced, perform the rotation angle sensor initialization and torque sensor zero point calibration Programming and Relearning.

PROCEDURE

1. READ VALUE USING TECHSTREAM (MOTOR VOLTAGE)
(a) Turn the ignition switch to OFF.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / EMPS / Data List /
(f) Select the items "Motor Terminal Volt (U)", "Motor Terminal Volt (V)" and "Motor Terminal Volt (W)" in the Data List and read the value displayed on the Techstream.

EMPS:





Result:






B -- REPLACE STEERING COLUMN
A -- REPLACE POWER STEERING ECU