Flywheel/Flex Plate

INSTALL FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle)





Using several steps, uniformly install and tighten the 8 bolts in the sequence shown in the illustration.
Torque: 130 Nm (1,326 kgf-cm, 96 ft-lbf)

DRIVE PLATE SUB-ASSEMBLY (for Automatic Transaxle)





Using several steps, uniformly install and tighten the 8 bolts in the sequence shown in the illustration.
Torque: 98 Nm (1,000 kgf-cm, 72 ft-lbf)