Removal

ENGINE IMMOBILISER: TRANSPONDER KEY ECU: REMOVAL

ENGINE IMMOBILISER: TRANSPONDER KEY ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

2. REMOVE METER HOOD SUB-ASSEMBLY Removal
3. REMOVE COMBINATION METER ASSEMBLY Removal
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal
5. REMOVE UPPER CONSOLE PANEL Removal
6. REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY
7. REMOVE NO. 1 RADIO BRACKET Removal
8. REMOVE NO. 2 RADIO BRACKET Removal
9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
10. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Removal
11. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Removal
12. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)
HINT: Use the same procedure for the RH and LH side.

13. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)
HINT: Use the same procedure for the RH and LH side.

14. DISCONNECT PASSENGER AIRBAG CONNECTOR
15. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal
16. REMOVE TRANSPONDER KEY ECU ASSEMBLY





(a) Disconnect the connector.
(b) Remove the screw and transponder key ECU assembly.