Installation

ENGINE IMMOBILISER: TRANSPONDER KEY ECU: INSTALLATION

ENGINE IMMOBILISER: TRANSPONDER KEY ECU: INSTALLATION

1. INSTALL TRANSPONDER KEY ECU ASSEMBLY





(a) Install the transponder key ECU assembly with the screw.
(b) Connect the connector.
2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation
3. CONNECT PASSENGER AIRBAG CONNECTOR
4. INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Installation
5. INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Installation
6. INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)
HINT: Use the same procedure for the RH and LH side.

7. INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)
HINT: Use the same procedure for the RH and LH side.

8. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
9. INSTALL NO. 1 RADIO BRACKET Installation
10. INSTALL NO. 2 RADIO BRACKET Installation
11. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY
12. INSTALL UPPER CONSOLE PANEL Installation
13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation
14. INSTALL COMBINATION METER ASSEMBLY Installation
15. INSTALL METER HOOD SUB-ASSEMBLY Installation
16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

17. REGISTER ECU COMMUNICATION ID
NOTICE: When replacing the transponder key ECU assembly, perform initialization Programming and Relearning.

18. REGISTER KEY
NOTICE: When replacing the transponder key ECU assembly, perform initialization Programming and Relearning.