Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: REMOVAL

LICENSE PLATE LIGHT ASSEMBLY: REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BACK DOOR GARNISH CENTER Disassembly
3. REMOVE BACK DOOR SIDE GARNISH LH Disassembly
4. REMOVE BACK DOOR SIDE GARNISH RH Disassembly
5. REMOVE BACK DOOR GARNISH SUB - ASSEMBLY OUTSIDE