Removal

INTERIOR: FUEL LID LOCK CONTROL: REMOVAL

INTERIOR: FUEL LID LOCK CONTROL: REMOVAL





1. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
(a) Remove the screw.
(b) Remove the cover in the direction indicated by the arrow mark in the illustration.
(c) Remove the cable.
2. REMOVE FRONT SEAT ASSEMBLY LH
(a) Remove the front seat Removal.
3. REMOVE TONNEAU COVER ASSEMBLY
4. REMOVE DECK BOARD SUB-ASSEMBLY
5. REMOVE NO. 1 DECK BOARD Removal
6. REMOVE REAR NO. 1 FLOOR BOARD Removal
7. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
8. REMOVE REAR SEATBACK ASSEMBLY LH Removal
9. REMOVE FRONT DOOR SCUFF PLATE LH Removal
10. REMOVE NO. 1 SIDE TRIM ASSEMBLY LH Removal
11. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
(a) Remove the floor mat.
HINT: It is not necessary to fully remove the floor mat. Partially remove it so that the cable can be removed later.

(b) Remove the cable from the clamps as shown in the illustration.









(c) Detach the claws and remove the cable.
12. REMOVE FUEL FILLER OPENING LID LOCK RETAINER





(a) Remove the lock retainer as shown in the illustration.