Disassembly

EXTERIOR: FRONT BUMPER: DISASSEMBLY

EXTERIOR: FRONT BUMPER: DISASSEMBLY

1. REMOVE HOOD TO FRONT END PANEL SEAL
(a) Using a clip remover, detach the 8 clips and remove the panel seal.
2. REMOVE FRONT BUMPER REINFORCEMENT
(a) Using a clip remover, remover the 2 clips and reinforcement from the bumper cover.
3. REMOVE RADIATOR GRILLE LOWER
4. REMOVE FRONT BUMPER HOLE COVER
5. REMOVE FRONT BUMPER GUARD COVER LH





(a) Using a screwdriver, detach the 3 claws and remove the cover.
HINT: Tape the screwdriver tip before use.

6. REMOVE FRONT BUMPER GUARD COVER RH
HINT: the same procedures described for the LH side.