Front Door Speaker

AUDIO / VISUAL: FRONT DOOR SPEAKER: ON-VEHICLE INSPECTION

AUDIO / VISUAL: FRONT DOOR SPEAKER: ON-VEHICLE INSPECTION

1. INSPECT FRONT NO. 1 SPEAKER
HINT: Remove interior parts so that the front No. 1 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 1 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front No. 1 speaker.
(c) Speaker resistance check
(1) Disconnect the front No. 1 speaker connector.
(2) Measure the resistance between the terminals of the speaker.
Standard resistance:
Approximately 4 Ohms
If the result is not as specified, replace the front No. 1 speaker.
2. INSPECT FRONT NO. 2 SPEAKER
HINT: Remove interior parts so that the front No. 2 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 2 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front No. 2 speaker.