Installation

U341E AUTOMATIC TRANSAXLE: SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL SPEED SENSOR NT






(a) Coat a new O-ring with ATF, and install it onto the speed sensor NT.






(b) Install the speed sensor NT with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the speed sensor NT connector.
2. INSTALL BATTERY CARRIER Installation

3. INSTALL BATTERY TRAY
4. INSTALL BATTERY Installation

5. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK