Vehicle - Replacement Certification Label Information
S-SB-0039-08August 6, 2008
Replacement Certification Labels
Service Category
General
Section
Identification
Market
USA
Applicability
TSB SUPERSESSION NOTICE
The information contained in this TSB supersedes TSB No. PG010-07.
^ The Notes in the Certification Label Criteria section and in the "Application for Replacement Certification Label" form have been updated.
^ The Note in the Procurement Procedure section has been removed.
TSB No. PG010-07 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding.
Introduction
Replacement Certification Labels (vinyl label installed on driver's door or door post) may be available from Toyota providing the request meets one of the criteria listed in this TSB.
Warranty Information
Certification Label Criteria
A replacement certification label may be requested if:
^ The vehicle is in an accident and the label is damaged or is attached to a part that will be replaced during the repair.
^ The label is stolen.
IMPORTANT NOTE
^ To expedite your request, please provide a clear, legible photograph of the certification regulation label along with the original label. This will allow TMS Technical Compliance to obtain information from the original label which is not easily available elsewhere. We may be unable to create a replacement label if this material is NOT submitted.
^ All replacement certification regulation labels for damaged and/or stolen vehicles are subject to approval by TMS Technical Compliance.
Procurement Procedure
To request a replacement label complete a copy of the form at the end of this bulletin. Your dealer parts account will be billed $40.00 for each replacement of a damaged or stolen label.