Reading and Clearing Diagnostic Trouble Codes

SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
HINT:
- When DTC B1650/23 is detected as a result of troubleshooting the airbag system, troubleshoot the occupant classification system.
- Use a Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.

(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
2. CLEAR DTC
(a) Connect a Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
(e) Clear the DTCs.