Removal

2ZR-FE EXHAUST: EXHAUST MANIFOLD: REMOVAL

REMOVAL

1. REMOVE AIR FUEL RATIO SENSOR
Refer to the procedures under "REMOVE AIR FUEL RATIO SENSOR" Removal.

2. REMOVE ENGINE UNDER COVER RH
3. REMOVE FRONT EXHAUST PIPE ASSEMBLY
Refer to the procedures under "REMOVE FRONT EXHAUST PIPE ASSEMBLY" Removal.

4. DRAIN AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle)
5. DRAIN MANUAL TRANSAXLE OIL (for Manual Transaxle)
6. REMOVE FRONT WHEEL
7. REMOVE FRONT AXLE SHAFT RH NUT Removal
8. REMOVE FRONT SPEED SENSOR RH Removal
9. REMOVE TIE ROD END SUB-ASSEMBLY RH Removal
10. REMOVE FRONT STABILIZER LINK ASSEMBLY RH Removal
11. REMOVE NO. 1 FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH Removal
12. SEPARATE FRONT AXLE ASSEMBLY RH Removal
13. REMOVE DRIVE SHAFT ASSEMBLY RH Removal






14. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 4 bolts and remove the No. 1 exhaust manifold heat insulator.






15. REMOVE MANIFOLD STAY
(a) Remove the 3 bolts and remove the manifold stay.






16. REMOVE EXHAUST MANIFOLD
(a) Remove the 5 nuts and remove the exhaust manifold.






17. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
(a) Remove the 3 bolts and remove the No. 2 exhaust manifold heat insulator.