Reading and Clearing Diagnostic Trouble Codes

CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect a Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester on.
(d) Enter the following menus: Powertrain / Cruise Control / Trouble Code.
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the tester on.
(d) Enter the following menus: Powertrain / Cruise Control / Trouble Code.
(e) Erase the DTCs.