Installation

BRAKE CONTROL: DECELERATION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL DECELERATION SENSOR






(a) Install the deceleration sensor with the 2 bolts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
(b) Connect the deceleration sensor connector.
2. INSTALL DECELERATION SENSOR PROTECTOR






(a) Install the deceleration sensor protector with the 2 nuts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
3. INSTALL REAR CONSOLE BOX COVER Installation

4. CHECK ABS SENSOR SIGNAL Test Mode Procedure