Jam Protection Function Does Not Operate

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function): Jam Protection Function does not Operate

Jam Protection Function does not Operate

DESCRIPTION

The power window regulator master switch controls the driver and passenger side power window regulator motors. The power window regulator switch controls the passenger side power window regulator motor. The jam protection function operates only within the specified range during AUTO UP operation.
HINT: The jam protection function is available on the driver side power window and passenger side power window.

INSPECTION PROCEDURE

PROCEDURE

1. POWER WINDOW REGULATOR MOTOR ASSEMBLY (LH AND RH)
(a) Reset the power window regulator motor Programming and Relearning.
(b) Check if the power window AUTO UP/DOWN function operates normally.
OK:
AUTO UP/DOWN function operates normally.
NG -- OTHER PROBLEM
OK -- Continue to next step.
2. CHECK JAM PROTECTION FUNCTION OPERATING RANGE
(a) Check that the jam protection function operates normally Power Window Control System (w/ Jam Protection Function).
HINT: The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.

NG -- REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (LH AND RH)
OK -- END