Removal

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE TONNEAU COVER ASSEMBLY
3. REMOVE DECK BOARD SUB-ASSEMBLY
4. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

5. REMOVE REAR SEAT INNER BELT ASSEMBLY LH
(a) Remove the bolt and inner belt.
6. REMOVE REAR SEAT OUTER BELT ASSEMBLY CENTER
(a) Remove the bolt and anchor part of the outer belt assembly center.
7. REMOVE REAR SEAT INNER BELT ASSEMBLY RH
(a) Remove the bolt and inner belt.
8. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER Removal

9. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
(a) Remove the 2 bolts and 2 rope hooks.
(b) Remove the No. 1 deck board.
(c) Remove the rear No. 1 floor board.
(d) Remove the 3 bolts and 3 anchor brackets.