Installation

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.





1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY
(a) Connect the connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag with the 3 bolts.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. PERFORM INITIALIZATION
(a) Perform initialization Testing and Inspection.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

4. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.