Removal

BRAKE CONTROL: FRONT SPEED SENSOR: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

2. REMOVE FRONT WHEEL
3. REMOVE FRONT FENDER LINER LH Removal

4. REMOVE FRONT SPEED SENSOR LH





(a) Detach the clamp and disconnect the connector.






(b) Remove the bolts and separate the speed sensor from the body.






(c) Remove the bolt and speed sensor.
NOTE: Keep the sensor tip and sensor installation hole free from foreign matter.