Wiper and Washer Systems: Service Precautions

WIPER AND WASHER SYSTEM

PRECAUTION

NOTE: When disconnecting the cable from the negative ()battery terminal, initialize the following systems after the cable is reconnected.

System
Power window control system
Sliding roof system

1. PRECAUTION OF WASHER NOZZLE ADJUSTMENT
a. Do not clean or adjust the washer nozzle with a safety pin, etc. because;
1. the washer nozzle tip is made of resin and could be damaged.
2. adjustment is not necessary because the washer nozzle is a spray type.

b. In case the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush, etc.