Headlamp Dimmer Switch: Service and Repair

Headlight Dimmer Switch:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING COLUMN COVER




3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Detach the claw and remove the headlight dimmer switch.

NOTE: Do not push the claw strongly, otherwise it will be damaged.

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
a. Attach the claw and install the headlight dimmer switch assembly.
b. Connect the connector.

2. INSTALL STEERING COLUMN COVER
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.