Pinout Values and Diagnostic Parameters
TERMINALS OF ECMTERMINALS OF ECM (PART 1):
HINT: Each ECM terminal's standard voltage is shown in the table.
In the table, first follow the information under "Condition".
Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
TERMINALS OF ECM (PART 2):
TERMINALS OF ECM (PART 3):
1. Waveform 1 (Reference)
Waveform 1 (Reference):
2. Waveform 2 (Reference)
Waveform 2 (Reference):
