For Vehicles Equipped With Vehicle Stability (VSC) System

FOR VEHICLES EQUIPPED WITH VEHICLE STABILITY (VSC) SYSTEM




a. NOTICES WHEN USING DRUM TESTER
1. Before beginning testing, disable the VSC. To disable the VSC, turn the ignition switch OFF and connect SST to terminals TS and CG of the DLC3.

SST 09843-18040

NOTE:
- Confirm that the VSC warning light blinks.
- VSC system will be reset when the engine is started.
- For safety, secure the vehicle with restraint chains while using a wheel dynamometer.

b. NOTICES OF RELATED OPERATIONS TO VSC
1. Do not carry out unnecessary installation and removal as it might affect the adjustment of VSC related parts.
2. Be sure to follow the instructions for work preparation and final confirmation of proper operation of the VSC system.