Wiper Switch: Service and Repair

WIPER SWITCH

REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING COLUMN COVER
3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY





(a) Disconnect the connector.
(b) Using a screwdriver, detach the claw and pull out the wiper switch.

HINT: Tape the screwdriver tip before use.

INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY





(a) Attach the claw to install the wiper switch.
(b) Connect the connector.
2. INSTALL STEERING COLUMN COVER
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL