Hazard Warning Switch: Service and Repair

HAZARD WARNING SWITCH

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE HEATER CONTROL KNOB
3. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER
4. REMOVE CENTER CLUSTER MODULE SWITCH

INSTALLATION

1. INSTALL CENTER CLUSTER MODULE SWITCH
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER
3. INSTALL HEATER CONTROL KNOB
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL