Precaution

PRECAUTION

1. INITIALIZATION

NOTE:
- When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.
- Perform the REGISTRATION (VIN registration) when replacing the ECM.
- Perform the RESET MEMORY procedure (A/T initialization) when replacing the automatic transaxle assembly, engine assembly or ECM.

HINT: RESET MEMORY cannot be completed by only reconnecting the cable to the negative (-) battery terminal.

2. FOR USING INTELLIGENT TESTER

CAUTION: Observe the following items for safety reasons:
- Read its instruction books before using the tester.
- Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
- When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.