Brake Warning Indicator: Testing and Inspection

CHECK BRAKE WARNING LIGHT




a. Check the parking brake warning light.
1. Disconnect the P3 switch connector.
2. Connect the terminal 1 of the wire harness side connector to the body ground.
3. Turn the ignition switch ON, and then check that the warning light turns on.

OK:
Warning light turns on.




b. Check the brake fluid level warning light.
1. Disconnect the B2 switch connector.
2. Connect terminals 1 and 2 of the wire harness side connector.
3. Turn the ignition switch ON, and then check that the warning light turns on.

OK:
Warning light turns on.