DTC 33

DTC C0210/33 Right Rear Wheel Speed Sensor Signal Malfunction

DESCRIPTION

DTC Detection Condition:

The speed sensor detects wheel speed and transmits the appropriate signals to the ECU. These signals are used for control of the ABS.

Each of the front and rear rotors have 48 serrations. When the rotors rotate, the magnetic field generated by the permanent magnet in the speed sensor produces AC voltage. Since the frequency of this AC voltage changes in direct proportion to the speed of the rotor, the frequency is used by the ECU to detect the speed of each wheel.

HINT:
- DTCs C0210/33 and C1233/38 are for the rear speed sensor RH.
- DTCs C0215/34 and C1239/39 are for the rear speed sensor LH.

Wiring Diagram:

Step 1-2:

Step 2(Continued)-4:

Step 5-7:

Step 7(Continued)-9:

INSPECTION PROCEDURE